Industrial Services: Mine Seals

Armorform Linings

Auger Hole Sealing

Bulkheads

Concrete Pumping

Decant Pipe Sealing

Grouting

Impoundment Securement

Mine Seals

Reclaim Tunnels

Rock Fall Stabilizations

Shotcrete

Slope Construction

Stacking Tubes

Stockpile Walls

Truck Dumps

Minova Seals

The Tekseal system is a simple, innovative, and cost effective, permanent seal system for the mining industry. Formwork is constructed of brattice cloth, brattice-boards, and posts. Supplied as a powder, the cement forms a low density foam (0.5 to 0.7 sg) when combined with the proper amount of air and water in the specially designed placer unit. It yields with ground pressure to 60% of original height before brittle failure – a substantial improvement over conventional seals; ground movement actually improves the seal. The 400 psi product begins to gel in minutes forming a nontoxic, non-combustible product weighing approximately 950 lbs/yd. The lower causticity of the Tekseal mix allows safer handling than other foamed cements.

For a seal that is far above its competition in all performance aspects, this is in our opinion the best seal that you could install in your mine. We at Wright Concrete have installed thousands of these seals all over the country and many mines won't use anything else. Ask them why it's the best!

Wright Concrete Steel Reinforced Oversized 120 psi Seal

For areas up to 12 ft. x 24 ft.

More information coming soon!